Studio Monitor Problems

Discussion in 'Monitoring' started by jamesb93, Jun 10, 2017.

  1. jamesb93

    jamesb93 Active Member

    Joined:
    Jun 10, 2017
    Location:
    Dundee
    Hello,


    I am having some issues with some studio monitors and have been lying around and I am trying to use them again.


    One of them creates no sound at all, the front light still illuminates though.
    The other appears to only play sound from the tweeter and not the sub.

    I have tried different inputs and different input devices with the same result.


    I will be trying to get them repaired, I am just wondering if anyone has encountered this before, as I'd hope they are not ruined.
     
  2. Boswell

    Boswell Moderator Distinguished Member

    Joined:
    Apr 19, 2006
    Location:
    UK
    Home Page:
    Ruined? Not at all! You could replace the drive units and amplifiers in both monitors and they would work as well as they ever did.

    What make and model of monitors are they?
     
    DonnyThompson and pcrecord like this.
  3. DonnyThompson

    DonnyThompson Distinguished Member

    Joined:
    Nov 25, 2012
    Location:
    Akron/Cleveland, OH
    Home Page:
    Per Boswell's suggestion, pretty much anything can be repaired; it's just a question of whether the price of the repair (parts, service) is going to be worth it, relative to what the monitors cost (and are worth, both in terms of price and quality ) versus replacing them by buying something else.
    It could be that the speaker in the one is fine but a particular component connected to it has failed, and in the other, it sounds like perhaps it could be a power amp that needs fixed ... everything is a just a guess without us being able to get into it and actually see the problems or testing components to nail down the problem(s).
    Please provide make and model of your monitors. They may indeed be worth repairing, or, you might end up being better off to put that money towards replacing them with something else instead.
    We can't say until we know what you have.
     
  4. jamesb93

    jamesb93 Active Member

    Joined:
    Jun 10, 2017
    Location:
    Dundee
    The are Samson Resolv SE 6's.

    I contacted a local repair company and emailed Samson but I dont really still have proof of purchase so I'll have to see how that goes.
     
  5. DonnyThompson

    DonnyThompson Distinguished Member

    Joined:
    Nov 25, 2012
    Location:
    Akron/Cleveland, OH
    Home Page:
    I'm seeing these being priced (new) at around $150 per monitor.
    With that in mind, you can determine whether or not it's worth to have them repaired based on the estimates for repair (parts, service, bench fee) that you receive.
    Obviously, if you are getting estimates of $100 or more (a piece) to repair, then you'd probably be better off to just order a new pair of these (or similarly priced models) that will come with a factory warranty.
    If you find you can get the parts for both that you'll need for a decent price, and are confident in your ability to repair them yourself, then that's also an option that might save you money.
    FWIW
     
    pcrecord likes this.
  6. chelukiano

    chelukiano Active Member

    Joined:
    Nov 26, 2017
    Location:
    Georgia
    Hi guyz i want to buy Dinaudio Bm6a(used) so when i was in sellers house for checking and when i set the volume fader at 12o clock the monitor show me that was clipping the converter was scarlet so it possible that there was a problem with monitors or sound car outputs? What u think about
     
  7. DonnyThompson

    DonnyThompson Distinguished Member

    Joined:
    Nov 25, 2012
    Location:
    Akron/Cleveland, OH
    Home Page:
    If I'm understanding your question correctly, the monitors wouldn't be clipping the audio interface, it would be the other way around, and this would likely be that his DAW's master buss was too hot( loud) in it's output level, or that the Audio interface (the Scarlett) was pushing volume that was set too high.
    This would be an understandable concern, though, if the seller frequently sent clipping signals to the monitors...
    When you listened to the monitors, did you notice any decreased high frequencies that could be caused by a damaged or blown tweeter? Have you tested them at lower speaker volumes with music that you are familiar with...to check for any distortion in the speakers?
    If this seller has been sending levels over time on a regular basis that have been clipping, or that have been passing any distortion, there could be serious wear on the speakers.
    You need to check these speakers at unity gain, making sure that neither the DAW or the interface is clipping the audio stage, or the converters, with music you are familiar with.
     
  8. dvdhawk

    dvdhawk Well-Known Member

    Joined:
    Dec 18, 2008
    Location:
    Western Pennsylvania, USA
    This is why I would take my own, reliable, reference source whenever buying any kind of amplifier and/or speaker. There are so many adjustments along the way that could be misleading, or just plain set improperly, you would have no idea whether any of it was true.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice