recording guitar clean... unwanted string noise

Discussion in 'Guitars' started by mokko, Jun 29, 2011.

  1. mokko

    mokko Active Member

    May 22, 2011
    theres a studio trick to erase unwanted string noise?

    or start over to record?
  2. Davedog

    Davedog Well-Known Member

    Dec 10, 2001
    Pacific NW
    If its electric and its really annoying or taking away from the track then its all about playing technique. Practice the part until you can play it without string noise and re-record. There are certain kinds of De-essers and EQ's which may or may not lessen the string noise but will also effect the sound of the instrument. A De-esser is your best bet but the very best is to learn to play without it.
  3. GravityJim

    GravityJim Active Member

    Dec 26, 2002
    FWA, IN
    Home Page:
    Agreed... It's mostly a matter of technique. Although if the offensive noise is "finger squeak," (that zipper noise you get from running a fingertip along a wound string), you can mitigate it a bit on future recordings by using a lightly coated string, like Elixirs. I like them a lot on acoustic guitars, but finally went back to uncoated D'addario XL's on electrics.

    You could also try recording the part on a guita strung with flatwounds, but that might be a bit extreme. And changing strings is no substitute for learning to play the part they way you want it.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice