AT 2035 and Scarlet Solo Issue

Discussion in 'Computing' started by Stephan, May 22, 2018.

  1. Stephan

    Stephan Active Member

    Joined:
    May 22, 2018
    Location:
    Delware
    I have the AT2035 going into my scarlet solo > Line out Rca Cable> Hum box input 1+2> Output 1+2> RCA converter 3.55mm > Line in on my PC.

    My issue is I can hear my pic on sound recorder and hear the mic on listen to in recording devices of the PC. I cant hear the mic on any other program. Like discord, Skype, mumble, games with friend or anything else.

    Help!!!! pls

    This is a 2 pc setup. One pc the USB work and the audio works.
     

    Attached Files:

  2. Stephan

    Stephan Active Member

    Joined:
    May 22, 2018
    Location:
    Delware
    PC settings:
     

    Attached Files:

  3. Stephan

    Stephan Active Member

    Joined:
    May 22, 2018
    Location:
    Delware
    I have also tried plugging the line in to my sound blaster z Line in. This has the same issue I can hear my mic is sound record and when recording.
     
  4. pcrecord

    pcrecord Quality recording seeker ! Well-Known Member

    Joined:
    Feb 21, 2013
    Location:
    Quebec, Canada
    Home Page:
    I think you are doing it wrong.
    You have a quality audio interface and you plug it to the line in of your computer's soundcard ??

    How about using the usb to get audio in and out of your computer (no need for hum box) ? The audio interface (the scarlett) is made to replace your soundcard. So the back outputs goes to your monitors (or speaker system).
    Once done, go in windows sound settings and choose the starlet as your default.
    You shouldn't use an audio interface for 2 computers, I just can't figure out why one would need that anyway..
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice