please hellp

Posted: Thu Jul 31, 2008 6:22 am

I have ALTO 100amx mixer and i don't know how to connect it with my sound card (emu0404).

Posted: Thu Jul 31, 2008 7:48 am

I have to admit the manual doesn't tell you exactly what to connect where, but you should be able to figure it out after reading it.
AMX-140 manual

How it is connected depends on what sound interface you have, and what you want to do with it.

Posted: Thu Jul 31, 2008 8:26 am

Two cables needed. Both 1/4' to RCA.

Connected to the Tape out RCA plugs L/R on your mixer into the 1/4' L/R Analogue inputs on your card.

You can also do it with 1/4' patch cables. From the line outs or Aux sends.

Seriously, read the manuals... Do you have to hold someones hand when you cross the road or can you look for yourself?

Posted: Thu Jul 31, 2008 9:31 pm

unless he/she has the USB version

Posted: Fri Aug 01, 2008 12:02 pm

i read it,but i don't understand. Please tell me how i connect mixer with soud card. I and my friend try to connect but we don't know.

Posted: Fri Aug 01, 2008 12:20 pm

Do you have any cables?

Posted: Fri Aug 01, 2008 5:41 pm

Posted: Fri Aug 01, 2008 10:31 pm

I have some cables.... Rolling Eyes

Can u write me what cable to use( price is don't mater) and please tell me how to connect this mixer with soud card (I gona creazy),I am realy disapointed Sad

...

Posted: Fri Aug 01, 2008 10:36 pm

I forgot to tell u.I want to record my vocals.

Posted: Sat Aug 02, 2008 5:18 am

I said this before. On this page.

"Two cables needed. Both 1/4' to RCA.

Connected to the Tape out RCA plugs L/R on your mixer into the 1/4' L/R Analogue inputs on your card. "

You could use a stereo RCA cable, and two RCA to 1/4' TRS connectors... You need to connect the RCA TAPE OUT on your mixer to the 1/4' ANALOGUE LINE IN of your card.

Phone a friend maybe?

Posted: Sat Aug 02, 2008 10:59 am

Potted meat......don u thin lucy?

Posted: Sun Aug 03, 2008 9:00 pm

Proof that studios will make a comeback, if you ask me...

Posted: Mon Aug 04, 2008 7:38 am

almost painful to read.....

Posted: Thu Aug 14, 2008 1:34 pm

bent wrote:

Proof that studios will make a comeback, if you ask me...

stil, spend some money and get a usb or firewire interface for your computer. Most likely, your sound card will not handle the recording you're trying to do, so you should get a computer interface. I'm assuming you don't want to spend much money, and I'm guessing your computer may not have firewire Rolling Eyes

so look into a USB interface.

Or, even easier, if you're just looking to record vocals, get a Snowball USB mic by Blue.

Posted: Thu Aug 14, 2008 2:02 pm

thedrumschlag wrote:

stil, spend some money and get a usb or firewire interface for your computer. Most likely, your sound card will not handle the recording you're trying to do

He has an Emu0404. Whether it's USB or PCI he didn't say but it should be good enough for unbalanced I/O to the mixer.

Reading the manual should reveal this: output from one to input on the other. Do you need to know more than that?

This topic sponsored by: