Search found 9 matches

Any advice on controlling a dynamic vocalist?

My signal chain is:
Soundelux ifet7 in "V" mode
Langevin Dual Vocal Combo
Digi 002R - Pro Tools LE 6.9

Female vocalist that has some very quiet p ...

Greetings all,

I have a few questions regarding the Temp Tabs, how many should be used per LENARD, 12 Cube, and for 6 inch corner block? In addition any tips on pressing the foam onto the walls wit ...

Use the following CD ripper...

http://www.exactaudiocopy.de/

The use LAME encoding at 192K

http://mitiok.cjb.net/

Both of these combined make for VERY nice MP3s and very accurate. You can ...

Jeff,

I just sent you the drawings in Visio Professional 2003 and CAD formats.

Thanks!

Mark

OK, first I'm a bit confused. Most of the pics you show on the links show treatment completed already? Is there a different room I should be looking at? (Perhaps it's due to the delay in my getting to ...

I have just moved into a new house and it has a third floor that makes a nicer control room thah what I had before. The ceiling at its peak is 9'10". One problem that I'm running into is sort of ope ...

I bought 4x8 sheets of plastic lattice at Home Depot, cut them to fit and glued the Auralex to the lattice and then used picture hangers to hand them on the wall.

At one location, I used 2x2 strips ...

I have eight of them. They were paired up in a frame, then filled with R-13 insulation, and screwed to 1/8" MDF for a backing. I then used picture hanging wire and hung them on my wall.

See graph ...

Whether you laying down ideas or not, you should record at 24-bit. Lot's of records have been cut with the scratch vocal or guitar becaue it was such a good take.

My opinion, of course.