Search found 655 matches

Saturday Night - The Bay City Rollers

Hooked On A Feeling - Blue Swede (Ooga-Chaga, Ooga-Chaga, Ooga-Ooga-Ooga-Chaga!)

For all the parents out there:

SpongeBob Squarepants theme song

Amazingly enough, lots of people budget $XXk for the gear, and forget to budget for cables, racks and everything else needed to hook all that gear up.

If its going to be a "pro" room you had better ...

Yeah, if you could could turn a 2" machine into a 2-track and run it at 60ips,,,

Just to double check - Are you recording/editing/mixing on an external firewire drive? PT does not work well on the drive on which the OS and PT software resides.

It takes a bit of tweaking to get it right, but SoundSoap Pro is pretty good. If you want to eliminate tape hiss you can get decent results using a low pass filter or a notch filter.

"Auto Read" will play back any automation you have written.
To write automation with your mixer/controller select "Auto Write".

You can bypass ALL the automation - including plug-ins - by selectin ...

That's why I stick to doing audio post. As a production sound mixer you're a third class citizen. They "trust you" until they hear the results of their own indifference to production sound (I've go ...

"Garbage in/Garbage out"

In order to have quality sound you must record quality sound to begin with. Capturing great production sound is the first step. Most young/beginning filmmakers completely ...

I'm almost finished with the rebuild of my studio after it was flooded in April '07. My contractor used Celotex for sound insulation under the sheetrock.

http://www.soundstop.net/professionals/s ...

For nearly four grand I would want to be able to pick my colour.
Not to mention that, at that price, it should have XLR outputs.

Thunder is really a sonic boom; the heat from the lightning almost instantly expands the air through which it travels, and then the surrounding air collapses back into the vacated space.

Basic scie ...

Mixing is an artform unto itself. It starts with quality speakers and the listening environment. The key is "translation", the mix sounding solid in a variety of situations - cars, living rooms, PA ...

For a slower attack go to the ADSR (Attack, Decay, Sustain, Release) in the synth and adjust the attack rate.

You can take some of the edge off of it with the filters with EQ and also with Reverb ...

It sounds like a three or four drawbar Hammond patch; on a real Hammond you would pull out the first three or four drawbars, probably with the second drawbar pulled out about half way, the other two o ...

If the noise is really pervasive it could be a problem with your specific XV-88. Maybe you should check out another one to see if it has the same problem.

I bought a Korg synth many years ago that ...